Material by material
| Material | Where it usually goes |
|---|---|
| Acrylic + fibreglass + bonded foam (the shell, the largest part) | C&D landfill |
| Steel frame | Scrap metal — recycled |
| Pump motors, heater, copper | Scrap metal — recycled |
| Skirt panels (synthetic) | C&D landfill |
| Skirt panels (cedar) | Clean wood, where a facility takes it |
| PVC plumbing | C&D landfill — foam-contaminated |
| Cover (vinyl over foam) | C&D landfill |
This is a general picture. What actually happens depends on the facilities near you and what they accept. We do not publish shares by weight because we have not weighed a sample.
Why the shell cannot be recycled
Three things have to be true for a recycling stream to exist: the materials must separate, the separated material must have a buyer, and there must be enough of it to justify the process. Bonded acrylic-over-foam fails the first. The foam is sprayed onto the fibreglass and has no clean layer to release.
Why we do not publish a recycling percentage
Because we would have to make it up. A figure like "90% recycled" means nothing unless someone weighed a real sample. What we can tell you is which parts have a real recovery stream and which do not — that is this page. If anyone quotes you a recycling figure, ask how it was measured.
The better outcome, when it is available
None of the above applies if the spa still works, because then it may not need cutting up at all. That is worth checking before you arrange anything. The reuse test.