The usual order, and why
- Power disconnected. By a licensed electrician before removal day. The switch on the spa itself controls the spa, not the supply.
- Water out. A gravity drain if it runs, a pump if it does not. Some water always stays in the footwell and the lines and comes out with the shell.
- Skirt off. Panels are usually clipped or screwed, and removing them gives access to everything else.
- Pack out. Pumps, heater, blower and board come out as units. This is the recoverable metal, so it is worth keeping separate from the shell.
- Shell cut. Into several sections, sized to the narrowest point on the route out. A side gate often sets the width.
- Frame out. Usually in a few pieces once the shell is off it.
The kind of tools involved
- A saw that cuts fibreglass. Fibreglass dulls blades quickly.
- A driver for the frame and skirt fixings.
- Respirator and eye protection. Cutting fibreglass and polyurethane foam makes fine dust you do not want to breathe.
- A pump, if the drain is seized.
- Tarps. Foam fragments are the biggest mess a spa removal makes.
The two places it binds
The plumbing runs through the foam. PVC lines are sprayed over, so they are hidden until the blade hits them. That is why cutting a shell "in half" can leave two halves still tied together by pipework.
The bottom pan. Many spas sit on a base pan that is glued, not fixed. It holds the last of the water and does not come off the way the panels do.
Can you do this yourself?
Many people do. The cutting itself needs the right saw, protective gear and care. Our price, from $349, includes the cutting, the carry-out, the haul and the disposal. What people underestimate is the disposal end: you need a truck or trailer, the sections have to meet the facility’s size limits, and the price per ton is often not what you pay for a small load. How C&D tipping fees work.
If the circuit needs a permitted disconnection, that part is often not DIY. What that involves.