This page follows the spa circuit itself: what it is made of and what happens to each part when the tub goes. For the code rules on disconnect distance and GFCI, and what "disconnected" means on removal day, see hot tub disconnect requirements.
What a spa circuit is
A typical 240V spa is fed from a dedicated breaker to an outdoor disconnect box near the tub, then to the equipment pack. Hot Spring describes the disconnect as a GFCI breaker in a weatherproof box, at least five feet from the tub and clearly visible from it. Plug-in 120V spas exist and are a different, much simpler case: Jacuzzi says many compact models plug into a standard NEMA 5-15 or 5-20 outdoor receptacle with GFCI protection built into the cord.
The parts, and what happens to each
| Part | Where it is | When the spa goes |
|---|---|---|
| Spa breaker | Main panel | Switched off first. Later removed, or left off and labeled, depending on what is done with the circuit. |
| Supply wiring to the disconnect | House to the outdoor box, often in conduit | Capped and terminated, or pulled out. |
| Disconnect box (usually with GFCI breaker) | Exterior wall or post near the tub | Left in place for a future spa, or removed and the wall made good. |
| Wiring from the box to the spa | Box to the spa's equipment pack | Disconnected at the spa before removal. Nothing should be left loose or exposed. |
| Bonding conductor | Attached to the spa's equipment | Dealt with by the electrician along with the rest. |
Two different jobs
| Making it safe | Leaving it compliant | |
|---|---|---|
| What | Switch off at the breaker. An electrician locks off, tests and disconnects the spa | Cap or remove the conductors, deal with the disconnect box, close the circuit out |
| Who | Breaker off: the homeowner. Everything else: a licensed electrician | A licensed electrician |
| Permit | Generally no | Often yes |
Cap it or take it out?
If another spa is coming, capping the circuit at the box keeps the run for later. If the space is becoming a patio or garden, removing everything back to the panel leaves nothing to explain to a future buyer or inspector. Some local rules choose for you. Maricopa County requires equipment and electrical to be removed back to the panel when an in-ground pool or spa is demolished, as we quote on our Sun City page. Glendale, AZ's pool demolition guideline requires sub-feed conductors removed back to the service when a pool sub-panel comes out (Glendale page).
Where we fit in
Before we remove a tub, it must be disconnected by a licensed electrician. If yours is still hard-wired, tell us in your request and we'll talk it through. Whether the circuit also needs a permit depends on your jurisdiction, so check your local rule before the work, not after: how to check yours.
Why it is worth settling first
A live circuit ending in an empty disconnect box is the kind of thing a home inspector writes up, often during a sale. Capping it properly at removal is usually simpler than fixing it under a closing deadline.
Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.
Get a hot tub removal quote ↗What this page is not
This is not electrical advice or a code reference. Never open a spa disconnect box or touch spa wiring yourself. Requirements differ by state, county and city, and only the authority having jurisdiction can answer for your address. On each city page we look up the published rule where we can find one, cite it and link to it.