This page answers one question: does the electrical work around a hot tub removal need a permit? For the code rules on where a spa disconnect goes and what "disconnected" means on removal day, see hot tub disconnect requirements.

Key takeaways

  • Turning off the breaker or unplugging a 120V spa: generally no permit.
  • Capping, terminating or removing a 240V spa circuit: often a permit.
  • A licensed electrician usually pulls it. Some places let an owner-occupant pull a homeowner permit for their own work.
  • Published fees we have found run around $50–$65. Yours may differ.

The distinction that usually decides it

Permit?
Switching the breaker off so the spa can be removed safelyGenerally no
Unplugging a 120V plug-in spaGenerally no
Disconnecting the supply wiring from the spaOften yes
Capping the conductors and closing out the circuit permanentlyOften yes
Removing the disconnect box and wiring back to the panelOften yes

What real permit rules say

Few cities name hot tub removal on its own. Most rules are general: a permit to alter, remove or modify electrical systems. Examples from our city research:

  • Scottsdale, AZ says a demolition permit is required to inspect electrical and plumbing removal for hot tubs and spas, and work done without a required permit is fined double the permit fee. Scottsdale page
  • Longmont, CO requires a building permit for any change to electrical systems, and lists electrical disconnects and reconnects among jobs needing extra detail on the application. Longmont page
  • Eden Prairie, MN's wrecking permit checklist asks for a signature that electrical service is disconnected. Eden Prairie page
  • Goodyear, AZ requires a permit to remove or alter a regulated electrical system, but exempts plugging portable equipment into an existing receptacle, so a plug-in spa can simply be unplugged. Goodyear page

Who can pull the permit

Usually a licensed electrical contractor. Homeowner permits exist, with limits:

  • Lakewood, CO: an owner-occupant of a single-family detached home may pull the permit only for work they do themselves. Anyone you hire must be registered with the city and pull the permit. Lakewood page
  • St. Paul, MN: a homeowner can pull a trade permit only for a home they own and live in, and must do the work themselves; it is unlawful on rented property. St. Paul page
  • Minneapolis, MN: the city doesn't issue electrical permits; they come from the Minnesota Department of Labor and Industry. Minneapolis page

A homeowner permit means the homeowner is allowed to do the work. It doesn't make it safe for someone without training. We recommend a licensed electrician for any spa wiring.

What it costs

JurisdictionPublished fee lineCovers spa circuit removal?
Plymouth, MNSwimming pools and hot tubs, $50 eachNot stated
Bloomington, MNResidential hot tub, pool or spa wiring, $65Not stated
Maricopa, AZResidential minor electrical permit, $56Ask Development Services

These are fees as published on each city's schedule when we checked. They are the permit only, not the electrician's labor. Ask your electrician whether the permit is in their quote.

How to check in one call

Call your city or county building department and ask: "I am removing a hot tub. Do I need an electrical permit to disconnect and cap the 240V circuit, or to remove it back to the panel?" Ask for the fee, which permit type to apply under, and whether a licensed electrician must pull it. If you live outside city limits, the county is usually the authority.

Why it is worth doing before the removal, not after

A live circuit ending in an empty disconnect box is a common home-inspection write-up. Fixing it under a closing deadline is usually harder than doing it while the spa is going anyway. Before we remove a tub, it must be disconnected by a licensed electrician; if yours is still hard-wired, tell us in your request and we'll talk it through.

Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.

Get a hot tub removal quote ↗

What this page is not

It is not a code reference and it is not legal or electrical advice. Requirements vary by state, county and city, and only your local authority can answer for your address. On each city page we look up the published rule where we can find one, quote it, cite it and date it. Where we cannot confirm it, we say so.

Frequently asked questions

Do I need a permit to remove a hot tub circuit?

Often, yes. Many cities require an electrical permit to alter or remove wiring, and a dedicated spa circuit is no exception. Call your building department and ask before the work starts.

Do I need a permit just to turn off my hot tub?

Generally no. Switching the spa off at its breaker, or unplugging a 120V plug-in spa, is not permitted work in the rules we have checked. Some cities, such as Goodyear, AZ, exempt plugging portable equipment into an existing receptacle from permits.

Who can pull an electrical permit for a hot tub?

Usually a licensed electrical contractor. Many places also allow an owner-occupant to pull a homeowner permit for work they do themselves on the home they live in, but not on rented property.

How much does a hot tub electrical permit cost?

It depends on the jurisdiction. Published examples include $50 for pools and hot tubs in Plymouth, MN, $65 for hot tub, pool or spa wiring in Bloomington, MN, and $56 for a residential minor electrical permit in Maricopa, AZ.

Sources