An old hot tub cover is big, awkward and often far heavier than it was new. This guide covers what's inside one, why it gets heavy, which cities take covers and how, how to cut one down, and what parts can be recycled. If the tub is going too, see how to get rid of a hot tub.

Key takeaways

  • A cover is four materials bonded together: a vinyl skin, a plastic vapor barrier, tapered EPS foam panels and a metal C-channel.
  • Old covers get heavy because the foam soaks up water once the vapor barrier tears. One dealer weighed an old cover at 87 lb; its replacement weighed 33 lb.
  • Many cities treat it as a bulky item. Some name it outright, some want it cut, and some charge per item: $20 in Yakima, $33 in Hillsboro.
  • The whole cover isn't recyclable. Stripped down, the metal is scrap, and clean, dry foam may be accepted at a foam drop-off. Call first.
  • Our hot tub removal includes the cover. From $349, with cut-down, haul-away and disposal included.

What a hot tub cover is made of

Most hard spa covers are built the same way. Manufacturers' spec sheets describe four layers:

LayerWhat it isWhat manufacturers publish
Foam coreExpanded polystyrene (EPS) panels, one per half, tapered so rain runs offHot Spring's Grandee cover: a "3.5” to 2.5” tapered, 2 lb. density foam core". Merlin Industries offers 1 lb density EPS on its economy cover and 2 lb on its standard cover.
Vapor barrierPlastic film sealed around each foam panelMerlin: a 4 mil vapor wrap, or 6 mil on its deluxe cover. Ameri-Brand: a 6 mil polyethylene vapor barrier.
Reinforcing channelA metal C-channel along the fold edge of each panelMerlin uses galvanized steel. Ameri-Brand describes a heavy-duty 16-gauge channel.
SkinVinyl jacket, hinge seal and a skirt that hangs over the spa lipAmeri-Brand: marine-grade vinyl. Merlin: a 3-inch skirt is standard.

A trade article in Pool & Spa Marketing sums it up the same way: an EPS core, a vapor-resistant barrier and a vinyl or polyester outer skin.

Cross-section of a folding hot tub cover: a vinyl skin and skirt outside, a plastic vapor barrier around each tapered EPS foam panel, a metal C-channel along each fold edge and a hinge seal between the halves. A note says a 5-year-old cover weighed 87 pounds against 33 pounds for its new replacement.
Inside a hot tub cover. Layers from Hot Spring, Merlin Industries and Ameri-Brand; weights from Olympic Hot Tub. Diagram: Hot Tub Haulers.

That build matters for disposal. The vinyl is sewn, the barrier is sealed around the foam, and the channel sits inside the barrier. Nothing comes apart without a knife, which is why recyclers won't take a whole cover.

Why old hot tub covers get so heavy

The vapor barrier is the only thing keeping the foam dry. Ameri-Brand puts it plainly: if the barrier is broken, the foam core "will absorb water (getting heavier and heavier)". Pool & Spa Marketing lists the usual causes:

  • steam, freeze-thaw cycles and spa chemicals causing micro-tears in the barrier,
  • warm water vapor condensing inside the cover, then freezing and thawing,
  • seals failing at the hinge and edges.

The same article says waterlogged foam "becomes heavy and sagging under its own weight". That's the cover you see on an old tub: a dip in the middle, water pooling on top and a hinge that won't close flat.

How heavy? Olympic Hot Tub, a Hot Spring dealer, weighed a 5-year-old cover from a small Jetsetter spa at 87 pounds. Its new replacement weighed 33. A cover from a bigger spa that has sat waterlogged longer can be heavier still. Lift an old cover with two people, and don't stand it on edge in the wind.

An old wood-cabinet hot tub beside a house, under a faded red-brown vinyl cover that sags at the seams and edges, with a lattice screen behind it.
A faded, sagging cover on an old spa: typical of a cover that's taken on water. Removal & photo: Dump Ninja (Woodland, CA), shown with permission · not a Hot Tub Haulers job.

Will my city pick up a hot tub cover?

Often, yes, even where the tub itself isn't accepted. A cover is light enough (when dry) and small enough to fit many bulky-item programs. These are the rules our city guides found that name covers:

CityWhat the rule says about covers
Tacoma, WACall-2-Haul lists a hot tub and cover among accepted items, for City residential garbage customers.
Farmington Hills, MIThe City's accepted-items list takes hot tub covers. Hot tubs must be cut into 60-pound pieces.
Carlsbad, CAA spa cover is accepted if cut in half. The spa itself is on the not-accepted list. Items must be under 200 pounds.
Auburn, WAWM's free annual bulky pickup takes a hot tub cover, the only spa item it accepts. Items must be under 300 pounds and no longer than 8 feet.
Federal Way, WAThe City and WM flyer lists hot tub covers, not hot tubs. No item over 300 pounds, and each must be liftable by two people.
Yakima, WAThe City's curbside haul-away service, by appointment, lists a hot tub cover at $20. Pickup starts at $25.
Hillsboro, ORThe City's bulky rate sheet lists a hot tub cover at $33, plus $22 a trip.
Aloha, ORWashington County's bulky list names a hot tub cover. Book through your garbage company.
Seattle, WASPU's Where Does It Go? tool says spa covers under 8 feet are accepted at the transfer stations.
Coon Rapids, MNThe City's Recycling Center refuses hot tub covers and cover foam. It has no trash bin.

Two patterns stand out. First, weight limits: 200 or 300 pounds per item is common, and "liftable by two people" is a real test for a soaked cover. Second, a cover on the list doesn't mean the tub is. Auburn, Federal Way, Yakima and Hillsboro all list the cover and not the tub. For the tub, see will my city take a hot tub?

If your city's list doesn't mention covers, don't assume. Call your hauler, describe it as a hot tub cover with its size, and ask whether it must be cut.

Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.

Get a hot tub removal quote ↗

How to cut a hot tub cover down to fit the trash

Where there's no bulky pickup, or the cover is too big for it, you can take it apart and put the pieces out with the trash over a few weeks. It's simple work with a utility knife, but wet foam is heavy and an old cover can be moldy, so wear gloves and work outdoors.

  1. Let it drain first. Lean the cover securely against a wall, where it can't blow over, and give it a few dry days. Alpine Spas' drying guide also says to pick a dry, sunny day. You're only trying to make it lighter to handle.
  2. Open the vinyl. Unzip each half, as Alpine's drying guide does, or cut along the seams.
  3. Slide out the foam panels. Each half has one, wrapped in its vapor barrier.
  4. Cut away the plastic wrap and pull out the metal C-channel along the fold edge. Keep the metal separate.
  5. Cut the foam to size. EPS cuts with a long utility blade or a handsaw. Cut pieces small enough to fit your cart with the lid closed. Expect bead mess; do it on a tarp.
  6. Bag the loose bits and spread the load over pickup days if your hauler has a weight limit per cart.
  7. Roll or fold the vinyl and cut it if needed so it fits the cart too.

If your city's bulky program takes the cover whole or in halves, as Carlsbad does, skip the strip-down and follow its rule.

Can a hot tub cover be recycled?

As a whole cover, no. The vinyl, film, foam and metal are bonded together, and recyclers want one clean material at a time. The City of Coon Rapids' Recycling Center lists hot tub covers among the items it refuses. Stripped down, two parts have a chance:

PartWhere it can goThe catch
Metal C-channelA scrap metal recyclerA small amount; worth it if you're going anyway. Call first.
EPS foam coreA foam drop-off, where one existsMust usually be clean, dry and free of film and tape. Many programs take packaging foam only.
Vapor barrier filmTrashFilm drop-offs want clean, dry film; this won't be
Vinyl skinTrashNo common recycling stream

Where foam drop-offs stand on cover foam

Foam programs are growing, but they were built for packaging. Three examples:

  • Tacoma reopened Styrofoam recycling at the Tacoma Recycle Center in May 2026, free for residents. It accepts clean block Styrofoam, coolers and packaging sheets. Dirty or contaminated foam is not accepted.
  • Nashville opened its first foam drop-off at the East Convenience Center in April 2026, free for Davidson County residents. It takes food-service foam, coolers and large molded packaging foam.
  • Kirkland, WA's StyroFest collection flyer, last updated in 2020, listed hot tub covers as not accepted.

Neither Tacoma nor Nashville names hot tub cover foam, so it may or may not qualify. Your best chance is foam that's dry, white and stripped of its plastic wrap, with no mold. Call before you load the car. To find a drop-off near you, the EPS Industry Alliance publishes a national EPS recycling map; your county's disposal guide is the other place to look. Our hot tub recycling guide covers the rest of the spa.

Can an old hot tub cover be reused?

Sometimes, but keep expectations modest. A cover is cut to fit one spa shape and size, so it's only useful to someone with the same or a very similar tub.

  • A dry, intact cover with working seams may find a taker if you list it free with its exact size and the spa model. It's worth a try if you're removing a tub whose cover is newer than the tub.
  • A waterlogged cover isn't worth passing on. Some dealers publish a way to dry the foam and re-wrap it; Alpine Spas, which publishes one, also says its warranty doesn't cover a waterlogged cover. A replacement is the usual fix.
  • Around the yard, people reuse the vinyl or foam in small ways. That's fine if it suits you, but it doesn't make a dent in a whole cover.

Mistakes to avoid

  • Lifting a soaked cover alone. Use two people and lift with your legs.
  • Leaving it standing on edge. A cover catches the wind like a sail.
  • Putting it out for bulky pickup unbooked. Yakima, for one, doesn't collect items left without an appointment.
  • Taking a whole cover to a recycling center. Coon Rapids' has no trash bin, so what it refuses goes home with you.
  • Forgetting the cover in a removal quote. If you're getting the tub removed, ask whether the cover, steps and cover lifter are included.

Getting rid of the tub too? The cover comes with it

If the cover is going because the hot tub is going, don't handle them separately. Our hot tub removal includes the cover. We cut the tub down, carry it out, haul it all away and handle the disposal, from $349, with the final price confirmed from your photos. We're insured.

Before removal day, have a licensed electrician disconnect the spa with the power off at the breaker. If it's still hard-wired, tell us and we'll talk it through. Drain it if you can; tell us if you can't. See our pricing, what hot tub removal costs elsewhere, or check where we work.

Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.

Get a hot tub removal quote ↗

Frequently asked questions

How do I get rid of an old hot tub cover?

Check your city's bulky-item list first. Tacoma, Farmington Hills and WM's Auburn pickup take hot tub covers; Carlsbad takes one cut in half; Yakima charges $20 and Hillsboro $33. If your city doesn't list covers, ask your hauler, cut the cover down for the trash, or include it in a hot tub removal.

Can a hot tub cover be recycled?

Not as a whole. It's vinyl, plastic film, foam and metal glued and sewn together, and Coon Rapids' Recycling Center, for one, refuses hot tub covers. Taken apart, the metal channel can go to scrap, and a foam drop-off may take the foam core if it's clean, dry and free of film. Call first.

Why is my hot tub cover so heavy?

The foam has soaked up water. Covers keep the foam dry with a sealed plastic vapor barrier; once that tears, the foam absorbs water and gets heavier. One Hot Spring dealer weighed a 5-year-old cover at 87 pounds; the new one weighed 33.

Can I put a hot tub cover in the trash?

Whole, usually not in a cart. Cut down, often yes, as long as the pieces fit with the lid closed and the cart isn't overweight. Some bulky programs set their own limits, such as Seattle's transfer stations taking spa covers under 8 feet.

Can you dry out a waterlogged hot tub cover?

Some dealers publish a method: unzip the vinyl, take out the foam, remove the damaged vapor barrier, dry it in the sun and re-wrap it. Alpine Spas, which publishes one, also says its warranty doesn't cover a waterlogged cover. For a cover you're throwing away, drying it mainly makes it lighter to carry.

Is the cover included in hot tub removal?

With us, yes. Our removal includes the cover along with the tub. With any company, ask: some quotes list the cover, steps and cover lifter as extras.

Sources