Key takeaways
- Empty: 635 to 1,100 pounds for the two- to seven-seat acrylic tubs in our table. Swim spas are much heavier.
- Filled: 2,570 to 5,810 pounds for those tubs, and 24,775 pounds for a Master Spas swim spa.
- Water does most of it: 8.34 pounds per gallon (USGS). A 400-gallon tub holds about 3,336 pounds of water.
- Decks: the residential code's minimum deck live load is 40 lb/sq ft. Hot Spring's filled spas load 95 to 125 lb/sq ft. Get a structural engineer or contractor to check.
- Removal: a full tub can't be moved. Drained and cut into sections, it's carried out in pieces.
How much does a hot tub weigh? 12 models, from spec sheets
We pulled the published dry weight, filled weight and water volume from each manufacturer's own spec page, manual or install sheet for 12 popular models, from an inflatable two-to-four-seater to a swim spa. Rows are sorted by seats.
| Model | Seats | Gallons | Dry (lb) | Filled (lb) | Filled includes people? | Source |
|---|---|---|---|---|---|---|
| Bestway Lay-Z-Spa Miami AirJet (inflatable) | 2–4 | 177 | Not published | 1,534 | Not stated | Bestway manual |
| Hot Spring Hot Spot TX | 2 | 190 | 635 | 2,570 | Yes, 175 lb per seat | Hot Spring |
| Master Spas Twilight TS 240X | 3 | 205 | 715 | 2,980 | Not stated | Master Spas |
| Hot Spring Hot Spot SX | 3 | 230 | 645 | 3,090 | Yes, 175 lb per seat | Hot Spring manual |
| Jacuzzi J-335 | 5–6 | 350 (avg.) | 764 | 3,683 (avg.) | Not stated | Jacuzzi |
| Master Spas Twilight TS 7.2 | 6 | 305 | 980 | 4,635 | Not stated | Master Spas |
| Bullfrog A7D | 5–6 | 376 at fill line (487 max) | 900 (with cover) | 4,967 (max fill, with cover) | No | Bullfrog |
| Caldera Utopia Geneva | 6 | 410 | 1,000 | 5,470 | Not stated | Caldera |
| Sundance Optima (880 Series) | 7 | 355 | 944 | 3,905 | Not stated | Sundance |
| Hot Spring Grandee | 7 | 455 | 790 | 5,810 | Yes, 175 lb per seat | Hot Spring |
| Master Spas Twilight TS 8.25 | 7 | 395 | 1,100 | 5,690 | Not stated | Master Spas |
| Master Spas Michael Phelps Signature PRO (swim spa) | — | 2,445 | 3,455 | 24,775 | Not stated | Master Spas |
Notes: Bestway's manual prints 1,534 lb beside its weight icon for the Miami AirJet without labelling it; it matches the water plus the spa. Bestway publishes a 68 lb shipping box weight for the whole kit, not a dry weight. Jacuzzi gives average volume and filled weight. Bullfrog's figures include the cover, and its install page says to plan for the maximum filled weight plus the occupants. Weights can change between model years, so check the sheet for your exact tub.
How much does an empty hot tub weigh?
Empty, the acrylic tubs above weigh between 635 pounds (Hot Spring Hot Spot TX) and 1,100 pounds (Master Spas Twilight TS 8.25). Seat count is a weak guide: the seven-seat Hot Spring Grandee (790 lb) weighs less dry than the six-seat Caldera Geneva (1,000 lb). Cabinet material, frame, insulation and equipment all change the empty weight.
Swim spas are a different class. Master Spas lists 3,455 pounds dry for its Michael Phelps Signature PRO. Inflatables are the opposite: Bestway ships the whole Miami AirJet kit in one 68-pound box.
Dry weight is the number that matters for moving and removal, because a tub is only ever moved empty.
How much does a hot tub weigh full of water?
Filled, the tubs in our table weigh 2,570 to 5,810 pounds. That is four to seven times their empty weight. Bullfrog's install page puts it plainly: the maximum filled weight of a portable spa "can be as much as 6,000 lbs", and a swim spa can be close to 20,000 lbs plus the occupants. The Master Spas swim spa above is listed at 24,775 pounds full.
Read the footnote before comparing. Hot Spring's filled weights include water and a 175-pound adult for every seat. Bullfrog's exclude occupants. Jacuzzi, Master Spas, Caldera and Sundance don't say on the pages we checked.
How to calculate your hot tub's weight
Water weighs about 8.34 pounds per gallon, according to the USGS. That gives a simple formula:
Filled weight = dry weight + (gallons × 8.34) + people
Check it against Hot Spring's published numbers, which include 175 pounds per seat:
| Model | Dry | Water | People | Calculated | Published |
|---|---|---|---|---|---|
| Hot Spot TX (190 gal, 2 seats) | 635 | 190 × 8.34 = 1,585 | 2 × 175 = 350 | 2,570 | 2,570 |
| Hot Spot SX (230 gal, 3 seats) | 645 | 230 × 8.34 = 1,918 | 3 × 175 = 525 | 3,088 | 3,090 |
| Grandee (455 gal, 7 seats) | 790 | 455 × 8.34 = 3,795 | 7 × 175 = 1,225 | 5,810 | 5,810 |
To use it on your own tub, find the gallons and dry weight in your manual or on the maker's site. If you can't, the gallons alone tell you most of the story: water is more than half the published filled weight of every tub in our table.
Why hot tub weight matters
1. The deck or pad has to carry it
The 2021 International Residential Code, Table R301.5, sets a minimum uniformly distributed live load of 40 pounds per square foot for decks. Filled spas concentrate far more than that. Hot Spring lists the load for each model: 95 lb/sq ft for the Hot Spot TX, 105 for the SX and 125 for the Grandee, all including occupants.
- Hot Spring requires the Grandee to sit on a reinforced concrete pad at least 4 inches thick, or a deck able to withstand more than 125 lb/sq ft. It says to consult a qualified building contractor or structural engineer before placing a spa on an elevated deck or indoors.
- Bullfrog says concrete foundations should be at least 4 inches thick and reinforced with rebar or mesh, and to consult a structural engineer or contractor before installing on a deck.
- Sundance says poured concrete pads at least 4 inches thick are the most common choice, and the surface must be level within 1/4 inch across the footprint.
- Bestway recommends a qualified contractor or structural engineer verify the surface can support the spa, the water and the bathers, even for an inflatable.
Codes vary by jurisdiction and edition, and this isn't engineering advice. If the tub is going on, or coming off, a deck, have a professional look at it.
2. Moving and removal crews plan around it
A filled tub can't be moved at all. It has to be drained first; see how to drain a hot tub. Even empty, 600 to 1,100 pounds of awkward, top-heavy shell needs enough people and the right equipment, and a clear route through gates, steps and side yards.
That's why there are two very different jobs:
- Moving a working tub keeps it in one piece, usually on its side on a dolly or with lifting equipment. See how to move a hot tub.
- Removing a tub for disposal usually means cutting the empty shell into sections that can be carried out by hand. See how a hot tub is cut down and what a hot tub is made of.
Never try to lift or tip a tub with too few people. If it's on a deck, near a slope, or has to go up steps, get help from someone equipped for it.
Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.
Get a hot tub removal quote ↗3. Disposal is priced by weight, with minimums
Landfills and transfer stations usually charge by the ton. Three published examples from our city guides:
| Facility | Rate | Minimum and extras | Spa rules |
|---|---|---|---|
| City of Phoenix transfer stations (Phoenix) | $55 per ton | $40 minimum; $20 for unsecured loads | Spas accepted if cut into fourths, or a $50 penalty |
| Salt River Landfill (Scottsdale) | $60 per ton | $30 minimum, plus a $30 or $150 special handling fee for bulky items | Hot tubs named for the handling fee; no liquids |
| Mesa County Landfill (Grand Junction) | $32 per ton | $10 minimum for up to 380 lb; double for uncovered loads | Not named; call first; no liquid waste |
Do the math with a drained tub. At Phoenix's $55 a ton, a 1,000-pound shell works out to $27.50, so the $40 minimum is what you'd pay. That's typical: for a single tub, the minimum and the handling fees often matter more than the per-ton rate. See how C&D tipping fees work.
Water is the other reason to drain. Every facility above refuses liquids, and the water would be most of the weight anyway.
Hot tub weight by size: quick reference
| Size | Models in our table | Dry (lb) | Filled (lb, as published) |
|---|---|---|---|
| Inflatable, 2–4 seats | Bestway Lay-Z-Spa Miami AirJet | Not published (68 lb shipping box) | 1,534 |
| 2–3 seats | Hot Spot TX, Hot Spot SX, Twilight TS 240X | 635–715 | 2,570–3,090 |
| 5–6 seats | J-335, TS 7.2, A7D, Geneva | 764–1,000 | 3,683–5,470 |
| 7 seats | Optima, Grandee, TS 8.25 | 790–1,100 | 3,905–5,810 |
| Swim spa | Michael Phelps Signature PRO | 3,455 | 24,775 |
Getting rid of a heavy tub
If the tub is going, weight is the removal company's problem, not yours. Drain it if you can; tell us if you can't. Have a licensed electrician disconnect it before removal day. Then we cut it down, carry it out, haul it away and dispose of it. Compare your options in how to get rid of a hot tub, see what hot tub removal costs, or check our pricing and where we work.
Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.
Get a hot tub removal quote ↗Frequently asked questions
How much does an empty hot tub weigh?
Acrylic hot tubs in our table weigh 635 to 1,100 pounds dry, from Hot Spring's two-seat Hot Spot TX to Master Spas' seven-seat Twilight TS 8.25. A swim spa can weigh several thousand pounds empty; Master Spas lists 3,455 pounds for one model.
How much does a filled hot tub weigh?
Manufacturers list about 2,500 to 6,000 pounds filled for two- to seven-seat tubs, and 24,775 pounds for one swim spa. Some figures include people at 175 pounds a seat and some don't, so check the footnote.
How do I work out my hot tub's weight?
Filled weight is roughly dry weight plus gallons × 8.34 pounds, plus the people in it. For Hot Spring's Hot Spot SX that's 645 + 1,918 + 525 (three adults at 175 pounds) = 3,088 pounds, against 3,090 on the spec sheet.
Can a deck hold a hot tub?
Not without checking. The 2021 International Residential Code sets a minimum live load of 40 pounds per square foot for decks, while Hot Spring lists 95 to 125 pounds per square foot for its filled spas. Hot Spring, Bullfrog and Bestway all say to consult a structural engineer or contractor first.
How much does an inflatable hot tub weigh?
Bestway's manual lists 1,534 pounds for its 177-gallon Lay-Z-Spa Miami AirJet when filled. The empty spa is light enough to ship in one box that weighs 68 pounds.
Does hot tub weight affect removal cost?
It can. Disposal is often charged per ton, though a single cut-down tub is usually under a facility's minimum. Phoenix's transfer stations charge $55 a ton with a $40 minimum.
Sources
- USGS Water Science School: A million gallons of water, how much is it? (8.34 lb per gallon)
- Bestway Lay-Z-Spa Miami AirJet product page
- Bestway Lay-Z-Spa Miami AirJet owner's manual (PDF)
- Hot Spring Hot Spot TX specifications
- Hot Spring Hot Spot Collection SX/TX owner's manual (PDF)
- Hot Spring Hot Spot Collection pre-delivery instructions 2026 (PDF)
- Hot Spring Grandee specifications
- Hot Spring Highlife Collection pre-delivery instructions 2026 (PDF)
- Jacuzzi J-335 hot tub review (specifications)
- Master Spas Twilight Series specifications
- Master Spas Michael Phelps Signature swim spas
- Bullfrog Spas A7D specifications
- Bullfrog Spas: delivery and installation
- Caldera Spas Utopia Geneva specifications
- Sundance Spas Optima specifications and FAQ
- ICC: 2021 International Residential Code, Table R301.5 minimum live loads
- City of Phoenix: transfer stations (fees and spa rules)
- Salt River Landfill: tipping fees
- Mesa County Landfill