A swim spa is a hot tub stretched to the length of a small pool. Removing one follows the same steps as a hot tub removal, but bigger in every way. Against a seven-seat hot tub, the swim spas below weigh roughly three to four times as much empty and hold three to five times the water. This guide covers what changes. For a standard spa, start with how to remove a hot tub.
Key takeaways
- Size: manufacturer specs run from 172 inches (about 14 feet) to 231 inches (over 19 feet) long, 52 to 60 inches tall.
- Weight: 2,300 to 3,455 pounds empty and about 14,800 to 24,775 pounds full for the models below.
- It rarely leaves whole. On its side it's still 52 inches or more thick. Out in one piece means a crane or similar equipment; for disposal it's usually cut down on site.
- Wiring can be bigger: 60 amps for Bullfrog's S200 and a 100-amp service for Master Spas' dual-temperature models. A licensed electrician disconnects it.
- Cost: companies that publish swim spa prices advertise from about $600 to $1,300 or more. Most quote them one by one.
How big and heavy is a swim spa?
Here are four models from manufacturer spec pages, with a seven-seat hot tub for comparison. More hot tub weights are in our guide to how much a hot tub weighs.
| Model | L × W × H (in) | Gallons | Dry (lb) | Filled (lb) |
|---|---|---|---|---|
| Hot Spring Grandee (7-seat hot tub) | 100 × 91 × 38 | 455 | 790 | 5,810* |
| Sundance AQ14 | 172 × 89 × 54 | 1,500 | 2,300 | about 14,818 |
| Bullfrog S200 | 204 × 94 × 52 | 1,950 | 2,720 | 18,950 |
| Master Spas Michael Phelps Signature PRO | 231 × 94 × 60 | 2,445 | 3,455 | 24,775 |
*Hot Spring's filled weight includes water and a 175 lb adult per seat. Bullfrog lists the S200 as 17′ × 7′10″ × 4′4″. Sources: Hot Spring, Sundance, Bullfrog and Master Spas.
Sundance gives the wider picture: most 12 to 20 foot acrylic swim spas weigh about 2,000 to 4,000 pounds empty and 15,000 to 30,000 pounds or more filled. Its large dual-zone models, 19 to 20 feet, run 3,200 to 4,200 pounds dry.
Why a swim spa usually can't leave whole
A hot tub goes through a side gate on its side, on a spa dolly. That works because a tub's height is its thickness on its side: 38 inches for the Grandee. Our hot tub moving guide covers the gate check.
A swim spa's height is 52 to 60 inches. Tipped on its side, it needs a clear opening wider than that, plus the dolly, plus room to swing 14 to 19 feet of shell around every corner. Few side yards have that.
The manufacturers' own delivery rules show the line. Bullfrog's pre-delivery guide says a standard delivery with spa-moving equipment needs a reasonably flat path that can take up to 3 feet 6 inches wide and 9 feet for its largest hot tub. If the yard doesn't meet the criteria, it arranges "a crane or other delivery method." Master Spas says its crew will coordinate a crane if necessary, but a crane isn't always needed.
Removal is delivery in reverse, with one difference: a tub going to the dump doesn't have to survive the trip.
Cut-down vs. crane: the two ways out
| Cut down on site | Lift out whole | |
|---|---|---|
| How | Drain, strip the equipment, cut the shell and frame into sections, carry them out | Drain, disconnect, rig, lift over the house or fence with a crane or similar equipment |
| When it fits | Almost any yard; the pieces go through a normal gate | The spa is being sold or moved, or there's clear access for a crane |
| What it needs | Saws and blades, a crew, time and room on the truck | A crane or boom truck, a place to park it, possibly a street permit, and a trailer that can carry the spa |
| Watch for | Dust and debris; many more cuts than a hot tub | Overhead power lines, trees and eaves; the cost of the lift |
For disposal, cutting down is the usual answer. The shell doesn't need to stay intact, and pieces go through any gate. A crane makes sense when the spa still works and is going somewhere else, or when there's truly no ground route out. A crane parked on the street may also need a city permit; see our edge cases page.
How many pieces?
More than you'd guess, because disposal sites set limits too. Two examples from our city guides:
- Phoenix's transfer stations say spas "must be cut into fourths to avoid a $50 penalty fee."
- Seattle's North and South transfer stations refuse material over 8 feet long and over 200 pounds.
Do the math on the Phelps PRO. At 231 inches, it needs at least three lengths to get under 8 feet (96 inches). At 3,455 pounds dry, a 200-pound limit means at least 18 pieces, before you count the frame and equipment separately. A hot tub like the Grandee, at 790 pounds, is a few cuts. A swim spa is a long day. See how a hot tub is cut down for the method.
Electrical: often a bigger circuit, sometimes two
Every hard-wired spa must be disconnected by a licensed electrician before removal, with the power off at the breaker. A swim spa can mean more wiring to deal with:
| Spa | Published electrical requirement |
|---|---|
| Hot Spring Grandee (hot tub) | 230 V, 50 amp |
| Bullfrog hot tubs | 50 amp supply; 60 amps for the A9L, M9 and M8 |
| Bullfrog S200 swim spa (3 jet pumps) | 60 amp service for full functionality |
| Most Master Spas swim spas | 240 V, 50 amp |
| Master Spas dual-temperature swim spas | 100-amp service, with both the swim side and the hot tub side wired |
So a single-zone swim spa may be on a circuit much like a large hot tub's. A dual-zone model, with two heaters and a wall between the zones, may have more than one connection to take out. Tell your electrician which model you have.
Whether capping or removing the circuit needs a permit depends on where you live. See hot tub disconnect requirements and do you need a permit to disconnect a hot tub?
Draining a swim spa: volume and time
Water weighs 8.34 pounds per gallon, per the USGS. The Phelps PRO's 2,445 gallons is about 20,391 pounds of water; the S200's 1,950 gallons is about 16,263. It all has to go somewhere your city allows, which is usually the sanitary sewer, not the street. Our draining guide has the methods and the local rules.
Use the drain guide's formula: minutes = gallons ÷ pump GPH × 60. Jacuzzi says a 2,000 to 3,000 GPH submersible pump empties a 300 to 400 gallon spa in about 10 to 15 minutes. At those rates:
| Spa | Gallons | 2,000 GPH pump | 3,000 GPH pump | 25 gpm max (Fairfax County, to storm drains) |
|---|---|---|---|---|
| Hot Spring Grandee | 455 | 14 min | 9 min | 18 min |
| Bullfrog S200 | 1,950 | 59 min | 39 min | 78 min |
| Michael Phelps Signature PRO | 2,445 | 73 min | 49 min | 98 min |
Those are best cases. Pump ratings drop with lift, and Fairfax County recommends 12 to 15 gallons per minute, with 25 as the maximum, when water goes to storm drains or streams. At 12 to 15 gpm, the Phelps PRO takes about 2.7 to 3.4 hours. Fairfax also asks you to let pool water sit 7 to 10 days for the chlorine or bromine to fade, or to use sodium thiosulfate, and to test below 0.1 mg/L before discharge. Check your own city's rule first.
Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.
Get a hot tub removal quote ↗How much debris a swim spa makes
A simple way to compare: the box each spa would fill whole, from its spec dimensions (length × width × height). Cut up, the pieces stack tighter than this, but the ratio holds.
| Spa | Outside box | Dry weight | Disposal at Phoenix's $55/ton, $40 minimum |
|---|---|---|---|
| Hot Spring Grandee | about 200 cu ft (7.4 cu yd) | 790 lb | $40 (minimum) |
| Bullfrog S200 | about 577 cu ft (21.4 cu yd) | 2,720 lb | about $75 |
| Michael Phelps Signature PRO | about 754 cu ft (27.9 cu yd) | 3,455 lb | about $95 |
Method: outside dimensions from spec sheets, converted at 1,728 cubic inches per cubic foot and 27 cubic feet per cubic yard. Disposal is dry weight at the City of Phoenix's published gate rate; your facility, and the frame and equipment, will change the figure.
The dump fee isn't the big number. The swim spa takes roughly three to four times the space on the truck, which can mean more than one load, plus several times the cutting and carrying. That's what you're paying for. Facilities price differently; see how C&D tipping fees work.
Swim spa removal cost
Most removal companies don't publish a swim spa price. In our survey of 71 companies' own hot tub pricing, 7 named swim spas as a price factor. The ones that put a number on it:
| Company | What it advertises for swim spas | Its standard hot tub price |
|---|---|---|
| CNC Junk Removal (Phoenix metro) | $649–$1,299 for large 8 ft+ tubs or swim spas | $349–$549 for a standard 6–7 ft tub |
| EA Junk Removal (Irvine, CA) | $700–$1,000+, depending on size and access | $400–$700 for most hot tubs |
| Joe's Junk & Trash Removal (Orange County, CA) | $600+ for swim spas and difficult jobs | $250–$600 |
| The Junk Dudes San Diego | Costs more than a standard tub; no figure | From $400 |
| Take Care Junk Hauling (Sacramento) | Quoted individually | $300–$600 for a 2–4 person spa |
| Junk Hubris (Portland metro) | Quoted separately | $300–$650 |
Each company's own advertised price, checked September 2026. These are not quotes and don't all cover the same work; independent companies, not affiliated with Hot Tub Haulers.
What moves a swim spa quote:
- Length and weight. More shell means more cuts, more blades, more trips to the truck.
- Access. A long carry, steps or a narrow side yard add time on every piece. Access is the factor companies name most for hot tubs, too; see hot tub removal cost.
- Dual zones. Two heaters, and more equipment, to strip out and disconnect.
- How it's set in. A deck built around it, or a vault in the ground, adds work (below).
- Water and power. Whether it's drained and disconnected before the crew arrives.
- Disposal. Possibly more than one load, at your local facility's rates.
In-ground and partly sunk swim spas
Swim spas are often set partly into a deck or the ground. Master Spas suggests a deck-mounted swim spa sit about 24 inches above the deck, and says it's possible to sink one into the ground with proper planning for a concrete vault, drainage and maintenance access.
- Set into a deck: some decking around the spa usually has to come up before the shell can come out. Removing or rebuilding the deck is a separate job from removing the spa.
- Sunk into the ground: the shell is cut out of the vault in place. What's left is a hole or a concrete vault. Filling, compacting or covering it is usually a separate trade and a separate price, and may need a permit. Ask your building department before work starts.
- Equipment access: on a sunk spa, the equipment bay may be in a pit or vault beside it. Show it in your photos.
Our edge cases page covers what changes on deck-sunk and in-ground jobs.
We remove swim spas too
Hot tub and spa removal is all we do, and that includes swim spas. We cut it down, carry it out, haul it away and handle the disposal. We're insured. Our removals start from $349 for a standard spa. A swim spa is a bigger job, so we price it from your photos: send photos of the spa and the route out (gates, steps, slopes, overhead wires, any decking), your ZIP and the model if you know it, and we'll send a price for your job, what it includes and available dates.
Have it disconnected by a licensed electrician before removal day. If it's still hard-wired, tell us and we'll talk it through. Drain it if you can; tell us if you can't. See our pricing and where we work.
Rather not deal with it? We remove hot tubs from $349 — cut-down, haul-away and disposal included.
Get a hot tub removal quote ↗Frequently asked questions
How much does swim spa removal cost?
Companies that publish a swim spa price advertise $600 and up (Joe's Junk & Trash, Orange County), $700 to $1,000+ (EA Junk Removal, Irvine) and $649 to $1,299 for large tubs or swim spas (CNC Junk Removal, Phoenix). Many others quote swim spas individually. Size and access drive the price.
How do you remove a swim spa?
Have a licensed electrician disconnect it with the power off at the breaker, drain it where local rules allow, take off the cover and equipment, then cut the shell and frame into sections small enough to carry out and to meet the disposal site's limits. Taking it out whole needs a crane or other heavy equipment.
How much does a swim spa weigh empty?
Manufacturer spec sheets list 2,300 pounds for Sundance's 14-foot AQ14, 2,720 pounds for the 17-foot Bullfrog S200 and 3,455 pounds for Master Spas' Michael Phelps Signature PRO. Sundance says most 12 to 20 foot acrylic swim spas weigh about 2,000 to 4,000 pounds empty.
Can a swim spa be removed in one piece?
Sometimes, but it takes the same kind of equipment used to deliver it. Bullfrog's standard delivery assumes a path about 3 feet 6 inches wide for its largest hot tub; past that, it arranges a crane or another method. A swim spa 52 to 60 inches tall won't tip through a normal side gate.
How long does it take to drain a swim spa?
About 40 to 75 minutes with a 2,000 to 3,000 gallon-per-hour pump for a 1,950 to 2,445 gallon swim spa. If the water goes to a storm drain under Fairfax County's 25 gallon-per-minute maximum, plan on about 80 to 100 minutes even at that maximum, and dechlorinate first where required.
Do you remove swim spas?
Yes. Our hot tub removals start from $349 for a standard spa. A swim spa is a bigger job, so we price it from your photos, with cut-down, haul-away and disposal included.
Sources
- Master Spas: Michael Phelps Signature swim spas (Signature PRO specifications)
- Bullfrog Spas: S200 swim spa specifications
- Bullfrog Spas: 2024 Pre-Delivery Guide (PDF)
- Sundance Spas: How much does a swim spa weigh?
- Hot Spring: Grandee specifications
- Master Spas blog: Swim spa delivery tips
- Master Spas blog: Dual-zone swim spa, a backyard oasis
- USGS Water Science School: A million gallons of water, how much is it? (8.34 lb per gallon)
- Jacuzzi: How to drain a spa
- Fairfax County: Proper discharge of swimming pool water
- City of Phoenix: Transfer stations (fees and spa rules)
- Seattle Public Utilities: North Transfer Station
- CNC Junk Removal: Hot tub removal (Phoenix metro)
- EA Junk Removal: Hot tub removal (Irvine)
- Joe's Junk & Trash Removal: Hot tub removal (Orange, CA)
- Take Care Junk Hauling: Sacramento spa removal
- The Junk Dudes San Diego: Hot tub removal
- Junk Hubris: Hot tub removal (Gresham and Portland metro)